Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11715/2364
Título : Design of device IoT parameter collector at photovoltaic panels
Autor : Álvarez, Rafael
Echeverría, César
Fortín, Marvín
Blanco, Erick
Palabras clave : Internet of Things
Photovoltaic
Photodetector
Power Measurement
Voltage Measurement
Current Measurement
Illuminance
Solar Panels
Temperature Measurement
UV Ray Measurement
I2C Protocol
Fecha de publicación : oct-2019
Citación : R. Álvarez, C. Echeverría, M. Fortín y E. Blanco, "Design of Device IoT Parameter Collector at Photovoltaic Panels," 2019 IEEE CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON), Valparaiso, Chile, 2019, pp. 1-6, doi: 10.1109/CHILECON47746.2019.8987999.
Resumen : This paper describes the design and functioning by stages that compose the environmental and electric parameter recollecting device for research Purposes, energetic efficiency, that take place in the production of electric energy using a photovoltaic panel. The device has a local storage through an uSD memory card and remote cloud storage. The device is classified as an IoT device. The information can be accessed through a mobile app. It has temperature, UV rays, light, current, voltage and power sensors. A prototype of the device has been constructed and the results of this prototype are shown in a display and the electric variables were compared using a calibrated multimeter.
URI : http://hdl.handle.net/11715/2364
Aparece en las colecciones: Producción científica de la Universidad Don Bosco

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
3. Design of Device IoT Parameter Collector, Erick Blanco 2019.pdf1.17 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.